counter create hit
volume

How to Increase Volume Output through Engineering Mode

Here’s a quick tweak to increase the volume output of your Blu Phone. I’ve tested this on my BLP but should work with most of the Blu Life line products:

This Method is shared by INCPak Team member Muzaffar Hussain

*** DO AT YOUR OWN RISK **

To open Engineering mode, dial : * # *# 3646633 # * # * (without the spaces)

1. Go to Hardware Testing
2. Click Audio
3. Choose Normal Mode
4. in “Max Vol. 0~160” tab, enter 160, then press Set
5. Press Sip, then change to Media, then press Set again

6. Go back to Audio Menu, choose Headset Mode
7. In Max Vol. 0~160 tab, enter 160, then press Set
8. Press Sip, then change to FMR, then press Set again
9. Press FMR, then change to Media, then press Set again
10: Press Media, then change to Matv, then press Set again

11. Go back to Audio Menu, choose Loudspeaker Mode
12. In Max Vol. 0~160 tab, enter 160, then press Set
13. Press Ring, then change to Sip, then press Set again
14. Press Sip, then change to FMR, then press Set again
15. Press FMR, then change to Media, then press Set again
16. Press Media, then change to Matv, then press Set again

Enjoy!



Interesting Here

Telenor

KKT educates Telenor on work ergonomics and a healthy lifestyle as Telenor celebrates Health and Safety week

21st November 2016, KKT Orthopedic Spine Centre Pakistan conducted a very fruitful awareness session on …

Loading Facebook Comments ...

Leave a Reply

Your email address will not be published.

Loading Disqus Comments ...