Connect with us


Philips Xenium Rom for Explay ported for QMobile i9

Philips Xenium Rom for Explay (by Bars749, Russian Developer) ported for QMobile i9 is ready to be ported, Screenshots and Download link added for everyone to download.

Syed Ahmed Ali Shah INCPak Team member ported this from which was previously ported by By Bars749.


Disclaimer: Neither me nor any member of INCPak TEAM shall be held liable for the damage done to your device after installing this ROM however we assure you that this ROM has been completely tested on QMobile Noir i9 and there is nothing to worry about unless you follow the procedure correctly.

Screenshots of Phillips Xenium Rom

 [sc:Adban2 ]

Download Rom



It is always recommended to make a full backup of your stock ROM on PC through MTKDroid Tools and make a backup of IMEI/NVRAM through that tool also.

  1. Download thePhillips Xenium Rom  from the link given above. Remember: Its been tested on QMobile Noir i9. There is not a guarantee that it will install on clone devices.
  2. Copy the ROM to Sd-card root directory without extracting the zip file.
  3. Goto Recovery. There are two methods to go to Recovery. ONE: Press the Power Button + Vol UP + Vol DOWN buttons together for 6-7 seconds and then press Power UP again to goto recovery. TWO: Or you can use any rebooter app which are present at Play Store to enter Recovery Mode.
  4. Once in Recovery Mode, click on Wipe Menu and then Wipe all the four as follows. Wipe DataFactory Reset (This will erase all your personal data.) Wipe Cache Wipe Dalvik Cache Format system (This will erase your current ROM, so please only do this when you’ve backup of your previous ROM)
  5. After the whole Wipe process, click on Install zip and then click on Choose zip sdcard.
  6. Now select the zip that you copied to your sd-card in the 2nd Step.
  7. Click Yes on any confirmation message regarding the installation of the zip.
  8. The installtion will take around 30-40 seconds.
  9. When installtion is complete, go back to Main Menu and click on Reboot the Phone.
  10. First bootup will take some time (e.g 3-4 Minutes). Please be patient.
  11. After the bootup, go through the initial Phillips Xenium Rom setup and then Enjoy.


Credits :- 

Syed Ahmed Ali Shah              Rom + Screenshots

Azhar Baloch                             Uploading Screenshots

Farhan Imaan                           Post