Alerts Tech Talks

Qmobile LT250 CWM & installation method

Qmobile LT250 CWM & installation method  shared by  Danish Armaan’Ali Malix and refined by Mango Man aka Jawad Naqvi INCPak Team member.  Please following the steps carefully, coz there is no backup of stock rom for this device, and I’m not responsible for any damage or device brick.

Usb Driver:…/kvamzkajh57mjv0/

(if you are facing any problem while driver installation on windows 8.1 or above then disable windows driver signature check)

NOTE : When connected to usb, make sure there are no unknown devices in device manager


Follow the steps 

1:  turn on the phone

2: Connect the phone via USB to the computer by holding down the Top Flight (APX connection mode: black screen)

3: Open CMD command prompt in administrator in the directory Decompression Pack

 Note : To open command prompt in administration mode, open the folder where you unpacked cwm-recovery-zip, now press & hold SHIFT key on your keyboard and then right click anywhere in the folder and select “command prompt”)

4: In CMD, type:

nvflash.exe –bct common_bct.cfg –bl bootloader.bin –go

5: At the end of the scrolling instructions, type:
nvflash.exe -r –download 15 recovery.img

6: Press the button quickly Vol Up until the phone restarts! You are now in recovery mode with CWM


For More you can join INCPak Forum, Tecnical Discussion 24/7 Danish and other members will assist you .


Click here to post a comment