QMobile Noir A11’s clone Stock Rom

4957

This is not exactly stock of rom of A11 but it is stock rom of one it Spanish clones. This will be helpful when you have bricked up the phone by installing wrong pre-loader or anything else. This is an opportunity to bring back your phone to life.

Also beware that it doesn’t include Q’s boot logo and animation

Requirements:

  • SP-Flash Tools
  • ADB Drivers

 

a) Download the following two parts and extract them

part 1 link http://adf.ly/SJraW
part 2 link http://adf.ly/SJrkf

b)

Go to the extracted folder and then the drivers folder and open the folder called “PL2303_Prolific_DriverInstaller_v1417” and run the
file “PL2303_Prolific_DriverInstaller_v1417.exe” to install required drivers ..

c) Open the folder called “Software Flash_Tool” and execute file “Flash_Tool.exe”

d) Now in the smart flash tool program click on the “Options” and check “USB Mode” then click on the “Options” and mark “DA Downloader All” >>”Battery”>>”With Battery” or follow the image

[Image: p7eg.jpg]

e) Now click on scatter-loading button and select The file named “MT6577_Android_scatter_emmc.txt” from the folder ” Qmobile Noir A11 _20130128 ”

f) Now be careful with this part   .. click “Firmware – Upgrade” and connect your mobile the PC via USB cable .

g) At this point you will be promoted to install drivers for your mobile .. click to install drivers from specfic location and select the file from the folder Driver >> USB VCOM Drivers >> your OS (like xp ) and then the .inf file … be carefull with that

h) after the installation is finished click “Firmware – Upgrade” ..you will then see some progessing bars with different colours and at the end a GREEN Circle .. which means you are done 😀

[Image: vlzr.jpg]

Credits:
Moazzam Khalid
www.facebook.com/moazzam.khalid
http://www.pakleets.net/Thread-QMobile-Noir-A11-Root-CWM-TWRP-Recovery-Unbrick-And-Stock-Rom?pid=453#pid453

Comments

2 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here